|
RCM-3 of IAEA
CRP “Development, Characterization and Testing of Materials of
Relevance to Nuclear Energy Sector Using Neutron Beams”
Agenda
13-17 May 2013
Joint Institute for Nuclear Research, Dubna, Russia
|
Monday, 13 May 2013 |
|
Welcome and Opening |
|
09:00-09:30 |
Director of JINR / Director of FLNP JINR, Joint Institute for Nuclear Research and its capacities / activities related to the CRP subject |
|
09:30-10:00 |
D. Ridikas & V. Inozemtsev (IAEA) - Introduction, status of the CRP, progress reports, objectives of the meeting; administrative issues |
|
10:00-10:30 |
Coffee break |
|
Reports of CPR members |
|
10:30-11:00 |
J. Santisteban, Evolution of Phases, Inter-granular Stresses and Texture in Cold Rolled Zr-2.5Nb Pressure Tubes, CNEA, Argentina |
|
11:00-11:30 |
M. Grosse, Neutron radiography Investigations of the Hydrogen Uptake of Fuel Cladding Tubes during LOCA and Severe Accidents, KIT, Germany |
|
11:30-12:00 |
E. Lehmann, Study of Material Property Changes After Long Term Irradiation by Means of Neutron Imaging Methods, PSI, Switzerland |
|
12:00-13:30 |
Lunch break |
|
13:30-14:00 |
R. Pugliesi, Improvement of a Neutron Tomography System, CNEN-IPEN, Brazil |
|
14:00-14:30 |
M. J. Radebe, Use of Neutron Beam Line Facilities for Nuclear Materials Related R&D With Emphasis on International Benchmarking of the Techniques, NECSA, South Africa |
|
14:30-15:00 |
C. M. Sim, Application of neutron tomography for the measurement Gd distribution in Al and the evaluation of hydride content in zirconium, KAERI, Republic of Korea |
|
15:00-15:30 |
Coffee break |
|
15:30-16:00 |
D. Carr, Development of the Capability of Evaluating Residual Stresses and Internal Defects in Radioactive Materials Using Neutron Scattering Instruments, ANSTO, Australia |
|
16:00-16:30 |
Y. Liu, Development, Characterization and Testing of Materials of Relevance to Nuclear Energy Sector Using Neutron Beams in China, CNNC, CIAE, China |
|
17:00 |
Hospitality event |
| |
|
Tuesday, 14 May 2013 |
|
Reports of CPR members (continued) |
|
9:00-9:30 |
P. Mikula, Development and optimization of high-resolution neutron scattering instruments dedicated to characterization and testing of materials of relevance to nuclear energy sector and related experiments in SANS, residual strain/stress and texture studies, ASCR, NPI, Czech Republic |
|
9:30-10:00 |
S. Sutiarso, Optimization of Neutron Beam Techniques for Characterization of Structural Materials, BATAN, Indonesia |
|
10:00-10:30 |
J. Teixeira, Study of ODS martensitic/ferritic materials, CEA, LLB, France |
|
10:30-11:00 |
Coffee break |
|
11:00-11:30 |
G. Torok, Microstructural Investigation of ODS Ferritic Steels, AEKI, Hungary |
|
11:30-12:00 |
R. Coppola, Characterization of Y2O3 particle distribution in oxide dispersion strengthened eurofer steel for nuclear applications by means of small-angle neutron scattering (SANS) and of neutron diffraction, ENEA, Italy |
|
12:00-12:30 |
A. Balagurov, Ferrite-Martensite Steels Dispersion Hardening studied by TOF Neutron Diffraction, JINR, Russia |
|
12:30-14:00 |
Lunch break |
|
14:00-14:30 |
C. Ohms, Combined Small Angle Neutron Scattering and Diffraction Studies to Investigate the Structure Property Relationship of Generation IV Reactor Candidate Materials and of Structural Components, JRC-EC |
|
14:30-15:00 |
A. Kozlov, Examination of austenitic steels microstructure change induced neutron
irradiation by using of neutron scattering methods, Institute of Nuclear Materials, Russia |
|
15:00-15:30 |
Coffee Break |
|
15:30-16:00 |
M. Mocko, Development, Characterization and Testing of Materials of Relevance to Nuclear Energy Sector Using Neutron Beams, LANL, USA |
|
16:00-16:30 |
T. Shikama, Radiation Effects on Correlation between Nuclear Materials and Their Radiation Induced Nano-Micro Structures, Tohoku University, Institute of Multidisciplinary Research for Advanced Materials, Japan |
|
16:30-18:00 |
Round table on Neutron Radiography (optional, for interested participants) |
| |
|
Wednesday, 15 May 2013 |
|
Discussions and preparation of summary reports from 4 subject Groups |
|
09:00-12:00 |
G1: ODS steels
G2: Welded materials/objects
G3: Zr-based materials, including H-uptake studies
G4: Irradiated materials/objects |
|
10:30-11:00 |
Coffee break |
|
12:00-13:30 |
Lunch break |
|
13:30 |
Technical tour |
| |
|
Thursday, 16 May 2013 |
|
Presentation, discussion and finalization of reports from 5 subject Groups |
|
09:00-10:30 |
Plenary reports from G1 and G2, followed by discussions |
|
10:30-11:00 |
Coffee break |
|
11:00-12:30 |
Plenary reports from G3 and G4, followed by discussions |
|
12:30-14:00 |
Lunch break |
|
14:00-15:30 |
RCM Chair summarizing remarks, followed by discussion |
|
15:30-16:00 |
Coffee break |
|
16:00-17:30 |
Preparation/finalization of group reports/chapters for the IAEA publication |
| |
|
Friday, 17 May 2013 |
|
Drafting of CPR report |
|
09:00-10:30 |
Drafting of CRP final report, including conclusions and recommendations |
|
10:30-11:00 |
Coffee break |
|
11:00-12:00 |
Finalization of the draft CRP report |
|
12:00-12:30 |
Final remarks, meeting closure |
|
